Your home’s dryer vent is more important than you might think, and installing a hose properly with a stainless steel hose clamp is critical. That’s because, according to Harris County Emergency Services District No. 48, 80% of the nation’s 15,600 structural fires caused by dryers are caused by clogged dryer vents. Here’s the best way for you to safely install your hose.
Step One: Determine Its Path
Just how do you want your dryer hose and ventilation duct to leave your home? It’s typically best to choose the shortest possible path to minimize potential complications. You need a path that’s no more than 25 feet, with five feet deducted for each 90-degree bend and 2.5 feet for every 45-degree angle. Plan your path properly to minimize any potential issues.
Step Two: Cut Your Dryer Vent Hose If Needed
You don’t want your dryer vent hose to be bunched up when you set it in place. Once you’ve measured the length of the hose that you need, you can cut the excess using a pair of aviation scissors. Be sure to wear working gloves during this step to avoid injury.
Step Three: Secure the Hose with a Stainless Steel Hose Clamp
Once you have your hose cut to size, place a stainless steel hose clamp to the end of your hose and carefully attach it to your dryer. Being careful not to cut the hose in any way, carefully tighten the stainless steel hose clamp until the hose is secured. Repeat this on the side of the hose that you’re attaching to the vent hood.
Step Four: Finish Up
Now that the dryer vent hose is secure, carefully push your dryer back against the wall while leaving enough room for the hose. Secure all your connections and plug your dryer back in to see how it works. Your dryer should now be ready to use!
Stainless steel hose clamps are one of the most useful tools you’ll find in your arsenal, helping you keep your dryer vent hose properly secure to your vent and preventing leaks. If you’re in need of a high-quality, highly durable stainless steel hose clamp, look no further than Hose Clamp Kings. Check out our available hose clamps for your own dryer installation or contact us today for more information!
